Marine Turbo Pressure Gauge 2Bar
The VDO Marine Turbo Pressure Gauge 2 Bar is a reliable and accurate instrument designed for monitoring turbo boost pressure in marine engines. It features a sleek design with a clear, easy-to-read display, ensuring precise readings of turbo pressure up to 2 Bar. Built to withstand the demanding conditions of marine environments, this gauge helps optimize engine performance and efficiency. It is an essential tool for boat owners and marine professionals seeking to maintain and monitor turbocharged systems.
Specification:
- Colour: Black
- Panel hole diameter: 52 mm - 2 1/16"
- Range: 0 to 2 Bar
- Lens: Dual - Anti-Fog
- Retail package 1 Pressure gauge
Sizes and mounting:
| Installation (Hole) diameter and Outside diameter: | 52 mm - 2 1/16 Inch and 59 mm - 2 1/3 Inch |
| Installation depth: | 50 mm |
| Locking height with Spinlock nut: | 0.5 mm - 20 mm |
| Locking height with bracket: | 2 mm - 15 mm (Optional) |
| Flushmount: | Optional kit A2C59510864 |
Functionality:
| Turbo compression upper scale range: | 0 to 2 Bar |
| Turbo compression under scale range: | 0 to 30 PSI |
| Sensor signal input turbo compression | Veratron Pressure sender 10 to 184 Ohm |
| Accuracy: | < 3.6 angular degrees |
| Connection: | Hirschmann 8 pins MQS connector |
Power supply:
| Operating voltage: | 8 to 32 Volt DC |
| Current consumption: | < 140 mA including warning LED |
| Reverse polarity protection: | Yes - 5 Minutes |
| Short circuit protection: | Yes - 1 Minute |
Dial & Pointer:
| Deflection angle: | 90° |
| Dial colour: | Black |
| Dial Illumination: | Amber LED backlight 605nm |
| Pointer: | White LED backlight |
| Warning LED: | Red (632nm) |
| Programming: | Veratron USB software kit |
Design:
| Model: | Veratron ViewLine Marine |
| Lens: | Dual - Anti-glare - Anti-Fog |
| Standard bezel: | Round black (Interchangeable) |
Protection and standards:
| Front protection class: | IP67 (IEC 60529) |
| Rear protection class: | IP52 |
| Relative humidity: | Maximum 95% |
| Operating temperature: | -30°C to +80°C (Plastic bezel) |
| CE standard: | Yes |
| DNV GL Certification: | Yes |
| Mechanical shock continuous: | 25G - 6ms - 1Hz |
| Mechanical single shock | 100G - 11ms |
| Free fall test: | 1 Meter - 3x |
| Housing flame retarding: | UL94-VD |
Retail package:
- Veratron ViewLine Black A2C59514149 Turbo pressure gauge
- Spinlock nut
- Bezel round black (Interchangeable)
- Adapter cable with 8 pole MQS connector
- Rubber seal
- QR code
- Safety instructions and installation manual
- Veratron Pressure sender not included
